MHM

The Mega-Burger is a 2" tubing coupler that locks into place with a snap! No tools are required, simply hook the stainless steel bale over the lip on the base, and push the handle down. You will hear a snap as the automatic spring loaded safety catch latches into place. It only takes about a second to install or remove the Mega-Burger. Once the clamp is on the 2" tubing and the bale is in place, you can slide the light into its final position and then lock it. The load fastens to the Mega-Burger with a standard grade 5 or grade 8 1/2" bolt, something you can pick up at any hardware store, in any length you need. The head of the bolt is secured in a hex shaped cutout in the base so you can tighten up the nut with only one wrench. You can use it for rigging, hanging intelligent lighting, or anything else, and never have to be concerned about putting a ding into your truss tube.